2
2. Functions Summary
(1) Constant heating, preheating, displaying and setting water temperature.
(2) Display time in AM & PM 12 hours mode.
(3) Circulation cleaning and presetting circulation cleaning.
(4) Radio, 10 channels memory or circumscribe device of CD or DVD, offering power output for DVD/CD and TV
set.
(5) Display and adjust 87 grade volume.
(6) Infrared remote control.
(7) Underwater multicolor LED light and ozone.
(8) Freezing-proof protection.
(9) Functions memory when power shut down suddenly
(10)Fahrenheit & Celsius temperature display shift.
(11) Three whirlpool pumps
，
One circulation pump, One water Column & waterfall pump, One blower.
(12) Functions locked on panel.
(13) Limit working watts control (optional)
(14) Selection of 110-120V/60Hz, 220-240V/50-60Hz, or 380-415/50Hz
3. Operations
1)
When the spa is connect with power, the control panel will be in dark light, and LCD screen on the panel will be
displaying time and current water temperature, and the radio channel will be display
“
---“. Under the situation, it
indicates the spa system is on off status, the preheat and circulation cleaning functions are turned off.
If the water temperature sensor is broken circuit, the screen will display“E1”, if the water temperature sensor is
short circuit, the screen will display” FF”. In this case, the heater can not work normally, please check the wire of
which is connecting with the water temperature sensor.
AM
AM
Fig
﹒
3
：
normal water temperature. Fig
﹒
4
：
water temperature sensor broken circuit
2) Lock operation :
This is a manual and automatic function. If there is no any operation on the panel in 30 minutes, all the current
working functions will be locked automation.
On the “off” status, press the
“
MEM
”the key to lock any functions, and the screen will display the “locked
“ signal.
To press the
“
MEM
”
key twice to unlock the functions
，
once the function is unlocked, the
“ locked” signal will disappear on the screen.
3) Time setting operation
：
