INSTALLATION MANUAL / MI0315.1
www.jnf.pt
12/72
4. MECHANICAL INSTALLATION
EN
4.3. INSTALLATION OF SLIDING ARM
4.3.1. PULL BAR
0-30
Wall
Door leaf
Pull bar guide
Track
Open direction
115
52
132,5
43
1. Open the door to 90º. Slide the pull guide
roller into the track
2. Fix the pull bar plate as shown
3. Move the plate ensure the wheel at the middle
position of track as shown
4. Hold the plate position. Fix the first screw near
center of the shaſt
5. Close the door, reapeat step 3 and fix another
screw at the other side
6 Manually move the door to ensure pull bar
works smoothly. Adjustment is requested if any
resistance durig the operating
7. Fix the last screw
Door leaf
0-30
Wall
Door leaf
Pull bar guide
Track
Open direction
115
52
132,5
43
1. Open the door to 90º. Slide the pull guide
roller into the track
2. Fix the pull bar plate as shown
3. Move the plate ensure the wheel at the middle
position of track as shown
4. Hold the plate position. Fix the first screw near
center of the shaſt
5. Close the door, reapeat step 3 and fix another
screw at the other side
6 Manually move the door to ensure pull bar
works smoothly. Adjustment is requested if any
resistance durig the operating
7. Fix the last screw
Door leaf
1. Open the door to a 90º angle. Slide the pull guide roller into the track
2. Fix the pull bar plate as shown
3. Move the plate to ensure the wheel is at the middle position of the track as shown
4. Hold the plate position and fix the first screw near the center of the shaft
5. Close the door and repeat STEP 3 and then fix another screw at the other side
6. Manually move the door to ensure the pull bar works smoothly. Adjustment is requested if there is any resistance
during the operating
7. Fix the last screw
Installation of sliding arm fix plate
Install the fix plate with 3 self-tapping
YIXK]YGYYNU]T
230
230
170
20
position stopper
Automaitc door right installation
Move position limiter to adjust open
degree (Position limiter is at leſt
while leſt installation)
Installation of sliding arm fix plate
Install the fix plate with 3 self-tapping
YIXK]YGYYNU]T
230
230
170
20
position stopper
Automaitc door right installation
Move position limiter to adjust open
degree (Position limiter is at leſt
while leſt installation)
Summary of Contents for IN.21.900
Page 24: ...www jnf pt 68 72 NOTAS NOTES ...