JMS Chip &
Performance ● 3247 Hwy 63 South ● Lucedale MS 39452 ● 601.766.9424 ● www.JMSchip.com
Unplug the wiring harness from the pedal position
sensor.
Note:
To separate the connector from the sensor: slide
back the red locking tab on the harness connector and
then press the black tab down to remove the connector.
Plug the PedalMAX device in-line between the pedal
position sensor and OE wiring harness by connecting
the male and female PedalMAX connectors to the
Original Factory connector and sensor.
Secure the PedalMAX unit using the supplied cable
ties. The device should not be hanging loosely or
unsecured. Do not attach or mount to any moving
assemblies such as the steering column.