19
clockwise;
● If it is biased to the right, use a hex wrench to turn the right screw
1/4 turn clockwise;
● If the running belt is still not in the middle, repeat the above action
until it is adjusted to the middle.
After adjusting the running belt to the middle, adjust the speed to the
sixth gear, and observe the deviation of the running belt and the
smooth running condition. If there is any deviation, repeat the
adjustment step.
Caveat! Do not overtighten the rollers! This will result in permanent
damage to the bearing!
8. lubricating oil
The treadmill is lubricated at the factory, but the treadmill's lubricity is
often checked to help keep the treadmill in optimal use. The
treadmill must be lubricated after one year of use or 100 hours of
operation.
After 30 hours or 30 days of use, when the treadmill is at rest, pull up
the running belt from the side and reach the surface of the running
platform as far as possible. If you feel the lubricant, you do not need
to add lubricating oil; if you touch the surface There is a strong
