6
ADDING THE CHOCOLATE TO YOUR
FOUNTAIN
Pour your melted chocolate into the centre of the Fountain bowl at the
bottom of the tier system.
When ready to serve, turn the switch to Heater & Motor or Motor. Have
the dipping foods arranged around the base.
The spiral drive inside will draw the chocolate up to the top – and then
cascade over the tiers with its irresistible warm chocolate aroma.
CARE AND CLEANING
Your Fountain is designed to be easy to use and easy to clean. Always switch
off your Fountain and unplug it before cleaning.
Start by pouring away any remaining liquid chocolate from the bowl. It ’s
important to put it into a plastic bag or another disposable container and then
place in a bin. Never pour the chocolate into a drain or the toilet . It could
cause blockages as it hardens.
Let the Fountain cool down. Wipe off any remaining chocolate in the bowl and
on the sides of the base unit with a damp paper towel or soft cleaning cloth
and buff dry. Do not use abrasive sponges or scourers as these will damage the
stainless steel surface.
The base unit of your Fountain contains the electrical components and so it
must obviously never be placed in water or in a dishwasher.
The spiral and the tier system can be safely washed by hand in warm, soapy
water. Then rinse and dry with a paper towel or soft cloth.
TROUBLESHOOTING
Your Battery Operated Table-top Fountain is designed for high reliability and
trouble-free use. On the rare occasions when you experience a problem, try
these simple solutions:
Chocolate is dripping, not flowing:
Chocolate is too thick. Add a small amount of vegetable oil. Or The Fountain
is not level. Check the surface it’s standing on. Adjust the base unit’s feet as
required. Or Make sure there’s at least 600g of melted chocolate in the bowl.