background image

Distributed by JML

JML, Unit 1 Eastside, Port of Tyne, South Shields, NE33 5SP 

Customer Services:

  UK: 0800 781 7831 (Freephone) • ROI: 041-978 0003 (Local rate) 

Email:

 [email protected] • 

Web: 

www.JMLdirect.com

©JohnMillsLtd/VG/02.20/1384/M

Disposal and the environment

This product is covered by the waste electrical and electronic equipment 
(WEEE) regulations. It should not be discarded with normal household waste,  
but taken to your local collection centre for recycling. For further information, 
please contact your local authority or approved disposal agency.

Technical Information 

continued

Fuse & mains plug replacement 
(UK & Ireland only)

This appliance is fitted with a BS 1363 13-amp 
plug. If you have to replace the fuse, only use 
those that are ASTA or BSI approved to BS 
1362 and have a rated current of 13 amps. 

To change the fuse
1.

 Use a flat-head screwdriver to prise the 

cover off the fuse compartment.

2.

 Carefully remove the existing fuse.

3.

 Clip the new 13 amp fuse into place.

4.

 Clip the cover back firmly into place.

If the power cord is damaged in any way 
please contact JML Customer Services.

Distributed by JML GmbH

  Rheinstraße 3, 63225 Langen, Germany

Summary of Contents for DriBUDDI









Reviews: