14
Cleaning and Care
Micro-pressure valve:
Lift off the micro-pressure valve (Fig.3).
Separate the two sections by rotating the
lower part anti-clockwise and pulling apart
(Fig.4).
Clean using soapy water and a soft cloth,
rinse with clean water and fully dry before
refitting.
To refit, line up the arrow on the lower part
with the arrow on the ‘side’ of the upper part
and fit back together (Fig.5). Rotate the lower
part clockwise to lock together and refit into
the lid.
Note:
Cooking could be affected if the
micro-pressure valve is not fitted correctly.
Drip tray:
Check and empty the drip tray at the rear of
the unit after each use (Fig.6).
Fig.3
Micro-
pressure
valve
Fig.6
Fig.4 -
Locked position
Fig.5 -
Unlocked position
Upper
part
Lower
part
ST_INS_D.indd 14
1/6/11 09:17:04
