JMA MULTICODE, Manual

Page: 19 / 53

19
3) Go to the .SETTINGS menu, select settings→adjust zero-machines (flat key)→Reader.
4) Select the jaw and then press the reader adjustment button.
To take readings of flat keys:
1. Place the flat key in the corresponding side of the jaw MP1.
2. Place the feeler in the testing position by turning the axis (T5)
3. In the technical specification of the key, press the key reading button.
3.3.2 ADJUST SAFETY JAW
3.3.2.1 RP FEELER
The RP feeler is used to adjust the cutter, it should be used when changing the jaws or the clamps. Follow these steps:
1) Place the RP feeler on the cutter support (T6)
2) Fix the feeler turning the 3 mm Allen key (T7)
3) Position the RPC adjustment sheet in the clamp.
3) Go to the SETTINGS menu, select settings adjust zero-machines (safety key) Cutter.
4) Select the jaw and then press the cutter adjustment button.
FIG. 23
FIG. 24
T6
T7