16
Use the following instructions to test the resistance and correct operation of the bike.
1. Plug in your Velox 2 to your mains and switch on. You should hear a beep from the
monitor.
2. Check that your pedals are securely on, flush to the crank and not angled. If the
thread is worn from numerous attempts to attach the pedal, or placed angled, you
are at risk of the pedal falling off.
3. Now sit on the bike and begin to pedal, increase and decrease the front and rear
gears and you should feel a change in resistance.
4. Whilst pedalling on the bike make sure there are no loud noise issues or wobbling
coming from the bike. If there is a loud noise, please contact our Customer Service
Team. If the bike is wobbling, please refer to ‘Levelling The Bike’.
TESTING THE BIKE OPERATION
TRANSPORTING THE BIKE
LEVELLING THE BIKE
If you are exercising on an uneven
surface use the rubber feet under the
stabilisers to adjust the height of the bike.
Once all four rubber feet are secure on the
ground with no wobble from the bike
tighten the silver nuts up to the stabilizer to
secure in place.
Unplug the machine and using the
transport handle on the back stabilizer lift
the bike until the wheels touch the ground.
Carefully push the bike to your desired
location.
