12
Velox 2 ASSEMBLY
The bike has been assembled and tested at the factory, so you shouldn’t have any
problems putting all the parts together. Components are designed to fit together, and
only basic tools are required for the assembly process. Inside the box you will find a Tools
Pack (Hex Allen Key, Multi-tool, Washers and Bolts). See previous page.
To assemble your JLL Velox 2 please follow these easy steps:
STEP 1
Attach the front and rear stabilisers to the
main frame using 4 x carriage bolts, 4 x flat
washers and 4 x domed nuts found in the
frame.
STEP 2
Connect the sensor wire between the
handlebar post and display post.
Do not trap these wires in the frame.
