JLG Skytrak 3013, Operation & Safety Manual

Page: 82 / 136

Section 5 - Attachments and Hitches
5 - 10 31211476
Sample Capacity Chart
Note: This is a sample capacity chart only ! DO NOT use this chart, use the one located in your
operator cab.
WARNING
TIP OVER HAZARD.
All loads shown on rated capacity chart are based on machine
being on firm ground with frame level (see page 4 - 6); the forks being positioned
evenly on carriage; the load being centered on forks; proper size tires being properly
inflated; and the telehandler being in good operating condition.
E
D
C
B
A
-10 º
-14 º
0º
10º
20º
30º
40º
50º
60º
62º
X X X
XXXX
XXXX
XXXX
XXXX
ft X X
X
X
X
X
X
XX
XX
XX
ft
XX
XX.XXXXX.XX
XXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXX
= XX MAX
+
XX MAX XX MAX
ANSI/ITSDF B56.6
XXXX
ON0270
This Capacity Chart may be used with this model ONLY.
The telehandler model is indicated on the boom or chassis. Model
XXXX is used for demonstration purposes only.
Boom Angle
Load zones indicate the
maximum weight that may
be safely lifted.
Load center must be equal to
or less than value shown.
Boom Extension Indicator
(arc)
Atachment type, weight
and dimensions must be
equal to or less than the
data shown.
Quick Attach Type
Forks Carriage Type
Forks Type