MACHINE CONTROLS
Section 1
Page 1-11
1001206597
METRO-LED
8. Scroll with the DOWN ARROW to 02
AUTO RUN TIMER screen.
9. Press the MENU/CONFIRM button.
10. Set the starting time using the
UP/DOWN arrow buttons to change
the numbers in each digit place.
To enter the next digit place, press
MENU/CONFIRM.
11. Set the required “Duration” period
of operation , then press
MENU/CONFIRM until the cursor
disappears.
12. Press the STOP button to return to
the home screen.
13. Press the DOWN ARROW to
display a summary of the current
machine settings.
14. 10 seconds before the engine start-
up an audible alarm sounds.
15. At the progammed starting time the
engine will commence the pre-heat
cycle. After 5 seconds the starter
motor cranks the engine.
16. the controller setting allows the
engine to “warm-up” for 10 seconds.
17. After completing engine ‘warm-up’,
each tower light is switched-on
sequenced at 3 second intervals.