SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
3-12
31215084
Safety Prop
NEVER WORK UNDER AN ELEVATED PLATFORM UNTIL IT HAS BEEN
RESTRAINED FROM MOVEMENT WITH THE SAFETY PROP, BLOCKING, OR
OVERHEAD SLING.
THE SAFETY PROP MUST BE USED WHENEVER MAINTENANCE PERFORMED
ON THE MACHINE REQUIRES THE SCISSOR ARMS BE RAISED. ENSURE THERE
IS NO LOAD IN THE PLATFORM.
The red safety prop is located is located at the rear of the
machine in the armstack. To engage the safety prop:
1.
From the Ground Control Station, raise the platform
enough to allow the safety prop to be engaged.
2.
Pull the ring to release the safety prop, then pull prop
down until it hangs vertically.
3.
Lower the platform until the safety prop rests on the
cross-shaft below.
4.
To disengage, lift up the platform, pull ring to release
the prop, then lower the platform.
1.
Prop Disengaged
2.
Prop Engaged
1
2
To
order
go
to
Discount-Equipment.com
