Power
The SloMoPro requires a 9-12 volt DC power supply capable of delivering 500
milliamps or more. This can be either from the power mains using the provided
power supply or directly from 9-12 volts DC. The connector is a 2.1mm coaxial
power connector. The center pin is positive. A power switch on the rear panel
turns the SloMoPro on or o
ff
.
The SloMoPro comes with a power supply that is appropriate for most countries in
which the SloMoPro is sold. If you need a power supply specific to your location,
please contact your local distributor or JLCooper Electronics.
If the power supply is damaged or lost, it can be ordered from JLCooper Electronics
directly. The JLCooper Part number is 561036.
SloMoPro USB User Manual
9
