Continued on Next Page
SB-VW-JETNCS/10W1v3 INSTR_SKU# 011332
S T E P 7
Pull the trunk liner away from the side of the trunk as shown.
S T E P 1 1
Push the trunk liner back in place to mark the location of the
3/8 - 16 x 2-14” Set Screw. Cut an “X” into the trunk liner to
allow the screw to pass through as shown.
S T E P 6
Remove the clip that holds the trunk liner to the back of the
trunk.
S T E P 1 0
Thread a 3/8 - 16 x 2-1/4” Set Screw into the U-Nut as shown.
S T E P 5
Carefully unclip and remove the trunk sill panel.
S T E P 9
Slide a U-Nut over the factory hole in the wheel well as
shown.
S T E P 4
Remove the trunk floor panel.
S T E P 8
Pictured is the hardware included with this Stealthbox®.
Page 2 • JL Audio, Inc., 2019
