Sheet SKU#011117 Revision 9/13/00
STEP 4:
Place the Stealthbox into the vehicle. Make sure the side of the Stealthbox fits flush against the
passenger side rear trim panel. The top of the Stealthbox should line up with the bottom of the rear trim
panel. The Stealthbox should sit firmly against the back wall of the cab.
STEP 5:
Push down firmly on the enclosure to make an
impression in the wax square.
STEP 6:
Remove the Stealthbox from the vehicle. There
should be a clear impression of the bolt head in the wax
square.
STEP 7:
Using the indentation in the wax square as a guide,
drill a
1/2
" diameter hole through the floor pan of the vehicle.
Always wear eye protection when drilling.
STEP 8:
Remove the wax square from the vehicle.
STEP 9:
Remove the bolt from the Stealthbox.
STEP 10:
Run speaker wires to the Stealthbox mounting
location. Trim the wires to length and connect to the
Stealthbox using the barrier strip.
STEP 11:
Test the operation of the Stealthbox.
STEP 12:
Place the Stealthbox into its moutning location,
making sure that the speaker wires don't get stuck between
the enclosure and the vehicle.
SB-GM-S10STD/8W1, JL AUDIO, Inc 1997 • Page 2
