SB-B-X5/10W1v2_INSTR_SKU#011221
C O N G R A T U L A T I O N S
You have completed the installation for this model!
Please refer to the Power Recommendation section for an
amplifier recommendation and basic set-up help.
S T e P 1 4
With a knife, carefully slice off the five tabs that secure the
fabric panel to the backside of the storage/woofer cover.
After the fabric panel has been removed. Grind off the two
long ribs (A) and two short ribs (B).
S T e P 1 3
If you are using the factory plastic footing, use the factory
mounting nuts to secure the plastic footing to the floor.
If you are using the supplied plastic footing, use the supplied
pair of speed nuts to secure the plastic footing to the floor.
Place the plastic panel that was removed and use the 10mm
nuts that were removed in STEP 2.
S T e P 1 2
Uisng the factory bolts, secure the factory fuse/relay box to
the vehicle.
Page 3 • JL Audio, Inc 2006
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.
JLA-SKU#011221-11-20-2006
• Printed in USA • ©2005 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902
#6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign
patents pending. For more detailed information please visit us online at
www.jlaudio.com.
(954) 443-1100
w w w. j l a u d i o . c o m
1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A
I N C L U D e D H A R D W A R e
(2)
8mm Split Lock Washer
(1)
Plastic Foot Mount
(3)
8mm Flat Washer
(2)
Speed Nuts
(1)
8mm Hex Nut
(2)
8mm x 30mm Hex Cap Screw
(1)
L-Bracket
(2)
8mm -20 Black Flat Socket Caps
S P e C I F I C A T I O N S
Enclosure Type:
Acoustic Suspension (sealed)
Driver Type:
10W1v2-4
Nominal Impedance:
4 ohms mono
Continuous Power Handling:
300 Watts
P O W e R R e C O M M e N D A T I O N
JL Audio recommends using a high quality amplifier such as the JL Audio A2150.
The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the A2150 when
being used to power your Stealthbox
®
.
The JL Audio A2150 is a very versatile audio component. Please consult the owner’s manual for even more
detailed information about installing and tuning this amplifier.
M I D / H I G H F R e q U e N C Y D R I v e R F I T M e N T
A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.
Front Speaker Size / Location:
6.5-inch / Front Doors
Fits JL Audio Models:
TR650-CSi, TR650-CXi, VR650-CSi, VR650-CXi, XR650-CSi, XR650-CXi & ZR650-CSi
Rear Speaker Size / Location:
6.5-inch / Rear Doors
Fits JL Audio Models:
TR650-CXi, VR650-CXi & XR650-CXi
B
B
A A
