Continued on Next Page
SB-B-X5/10W1v2_INSTR_SKU#011221
S T e P 7 ( O P T I O N A L )
If you have the factory woofer system. You can use the
factory footing, instead of the supplied footing for the next
step.
With an 5mm allen key, remove the pair of bolts that secure
the plastic footing to the factory woofer enclosure.
S T e P 6
If equipped with the factory woofer system.
Grab the top of the factory woofer enclosure and pull out.
Guide the factory fuse/relay box, up and over the factory
woofer enclosure.
S T e P 5
If equipped with the factory woofer system.
With an 6mm allen key, remove the bolt that secures the top
of the factory woofer enclosure.
S T e P 4
With an 7mm socket, remove the five bolts that secure the
factory fuse/relay box.
Page 2 • JL Audio, Inc 2006
S T E P 9
Place the bottom of the Stealthbox
®
into the mounting
area .
Guide the factory fuse/relay box up and over the top of the
Stealthbox
®
.
Secure the plastic mounting flange to the floor area. Using
the two factory 10mm nuts that were removed in STEP 3.
S T E P 1 1
Place a supplied lock washer and then flat washer onto the
last supplied 8mm x 30mm bolt. Secure the L-bracket to the
top of the Stealthbox
®
S T E P 1 0
If equipped with the factory woofer system.
Secure the supplied L-bracket to the vehicle using the
factory bolt that was removed in STEP 5.
If not equipped with the factory woofer system,
but does have the threaded insert
.
Place a supplied
flat washers onto the supplied 8mm x 30mm bolt. Secure
the L-bracket to the vehicle with this bolt assembly.
If no threaded insert is found.
Place a supplied flat
washer onto the supplied 8mmx30mm bolt. Place this
bolt through the L-bracket and hole. Place a supplied flat
washer and then lock washer and 8mm nut onto the bolt
and secure.
S T E P 8
If equipped with the factory woofer system.
Using the factory hardware, secure the factory footing to
the Stealthbox.
If not equipped with the factory woofer system.
Using an 5mm allen key, secure the supplied plastic footing
to the Stealthbox
®
with the pair of supplied black flat socekt
screws.
Attach desired length of speaker wire to the Stealthbox
®
.
double check the woofer for proper operation.
