6
| JL Audio - XD300/1 Owner’s Manual
TURN-ON LEAD
5IF9%VTFTBDPOWFOUJPOBM7SFNPUF
turn-on lead, typically controlled by the source
unit's remote turn-on output. The amplifier will
UVSOPOXIFO7JTQSFTFOUBUJUTi
Remote
w
JOQVUBOEUVSOPGGXIFO7JTTXJUDIFEPGG*G
a source unit does not have a dedicated remote
turn-on output, the amplifier’s turn-on lead can
CFDPOOFDUFEUP7WJBBTXJUDIUIBUEFSJWFT
power from an ignition-switched circuit.
5IF9%Ti
Remote
wUVSOPODPOOFDUPS
JTEFTJHOFEUPBDDFQU"8(o"8(XJSF5P
connect the remote turn-on wire to the amplifier,
first back out the set screw on the top of the
terminal block, using the supplied 2.5 mm hex
wrench. Strip 1/2 inch (12mm) of wire and insert
the bare wire into the terminal block, seating it
firmly so that no bare wire is exposed. While
holding the wire in the terminal, tighten the set
screw firmly, taking care not to strip the head of
the screw and making sure that the wire is firmly
gripped by the set screw.
