background image

Thank you for purchasing a JL Audio Marine Lighting  

Controller for your sound system. 

This product has been designed and manufactured to exacting  

standards in order to deliver years of enjoyment. For maximum 

performance, we highly recommend that you have your MLC-RW 

installed by an authorized JL Audio dealer. Your authorized dealer has 

the training, expertise and installation equipment to ensure optimum 

performance from this product. Due to the complexity of modern 

electrical systems, we do not recommend self-installation unless you 

have extensive experience in automotive and marine electrical systems. 

Should you decide to install this product yourself, please take the time to 

read this manual thoroughly to familiarize yourself with its installation 

requirements and setup procedures.

If you have any questions regarding the instructions in this manual or  

any aspect of the product’s operation, please contact your authorized  

JL Audio dealer for assistance. If you need further assistance, please submit 

a request to the JL Audio Technical Support Department at  

www.jlaudio.com/support or call (954) 443–1100 during business hours.

OWNER’S MANUAL

Marine Lighting Controller

MLC-RW

Summary of Contents for MLC-RW

Page 1: ...do not recommend self installation unless you have extensive experience in automotive and marine electrical systems Should you decide to install this product yourself please take the time to read this manual thoroughly to familiarize yourself with its installation requirements and setup procedures If you have any questions regarding the instructions in this manual or any aspect of the product s op...

Page 2: ...Install the controller module in a dry well ventilated location that does not interfere with factory installed systems Do not install where it will be directly exposed to the elements Do not mount this product in an engine compartment or areas of extreme heat Areas exposed to a heater or hot air should also be avoided Securely mount this product so that it does not come loose in the event of a col...

Page 3: ...rol Module Placement Connection While the MLC RW control module can be mounted in any orientation its installation location and distance should be considered when selecting a mounting position for the rotary encoder and making connections Use the two 8 x 1 1 2 inch phillips head stainless steel screws to mount the control module to a flat surface Refer to the table below for wire connection info W...

Page 4: ...hase at retail and no warranties whether express or implied shall apply to this product thereafter Some states do not allow limitations on implied warranties therefore these exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If you need service on your JL AUDIO product All warranty returns should be sent t...

Reviews: