background image

JX

250/1D • 

JX

500/1D • 

JX

1000/1D

 

 

9

ENGLISH

“BASS BOOST” CONTROL

The JX monoblock includes a single band, 

boost-only bass equalizer controlled by a rotary 
knob marked 

“Bass Boost”

. This control has a 

boost range of 0dB (full-counterclockwise) to 
+12dB (full-clockwise) and is centered at 45 Hz. 

 

REMOTE LEVEL CONTROL

With the optional RBC-1 Remote Level 

Control (sold separately), you can control the 
subwoofer volume from the front of the vehicle.

The RBC-1 connects to the jack 

labeled 

“Remote Level Control”

 on the 

Connection Panel of the JX Monoblock 
amplifier, using a standard telephone 
cable (supplied with the RBC-1). 

When connected to the amplifier, the 

Remote Level Control operates as follows. 
At full counter-clockwise rotation, the audio 
will mute completely. At full clockwise 
rotation the level will be the same as if 
the RBC-1 was not connected at all. In 
other words, it operates strictly as a level 

attenuator.  

This control will not affect the

 

"Bass Boost"

 feature of the JX Monoblock.

Care should be taken to securely mount this 

control in a manner that does not interfere with 
vehicle operation.

When setting the amplifier’s input sensitivity, 

the Remote Level Control should be unplugged or  
at full clockwise rotation (maximum level).

 

Summary of Contents for JX1000/1D



















Reviews: