JKS Steering Stabilizer Relocation Bracket Installation
PN OGS162
Page 1 of 3
Installation
Instructions
Product:
Steering Stabilizer Relocation Bracket
Part Number:
PN OGS162
Application:
Jeep Wrangler JK, 2007+
Welcome
CONGRATULATIONS on purchasing a new Steering
Stabilizer Relocation Bracket from JKS Manufacturing.
We are committed to providing you with the best
products available and your satisfaction is our first
priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain
important installation and maintenance information.
Important
INSTALLATION REQUIRES WELDING
by a qualified
welder or metal fabricator. Weld-on installation is
strongly recommended for maximum strength and
reinforcement of the vulnerable factory track bar bracket.
ALTERNATE BOLT-ON INSTALLATION
is acceptable
on light-duty applications. However, bolt-on installation
will not reinforce factory track bar bracket.
Tools Required
Hydraulic Floor Jack & Jack Stands
Metric/Standard Socket Wrench Set
Black Felt Tip Marker *
(or equivalent)
Torque Wrench
Die Grinder with Sanding Wheel *
(or equivalent tool for removing paint)
Welding Equipment *
3/8” Drill Bit & Center Punch *
Sharp Metal Scribe *
Satin Black Spray Paint *
Plastic Zip Ties or Bungee Cord
(recommended)
Factory Service Manual
(recommended)
* Indicates tool that may not be necessary for every installation.
Thoroughly read instructions in advance to determine which
tools will be required for your application.
Parts
DESCRIPTION
QTY
A
Steering Stabilizer Bracket
1
B
3/8” x 1” GR5 Bolt
3
C
3/8” Flat Washer
6
D
3/8” Ovalok Nut
3
E
7/16” Fender Washer
1
F
7/16” Ovalok Nut
1