ERROR MESSAGE & TROUBLE SHOOTING
E1 (Error 1):
When the machine starts but Computer could not read the speed signal from sensor for 7 seconds, E1
will be shown on the computer.
E5 (Error 5):
If it’s over current in running, E5 will be shown.
After turning on master power switch and the safety key is placed on the computer, one of Error
message E2, E3, or E4 will be shown if the below symptom happens:
E2 (Error 2):
Either Motor Cable M+, M- is not well connected to the controller, Or short cut of IGBT,
Or no function on Relay, E2 will appear on the computer.
E3 (Error 3):
If cable that connects Control box and Computer is not well connected or disconnected,
E3 will appear.
E4 (Error 4):
If no function on Relay, E4 will appear.
If any above trouble happens, please consult the distributor.
SMELL
If any smell comes out from motor, please firstly spray out some silicone on the running board (Please
refer to page : RUNNING BOARD MAINTENANCE), and see if the situation improves.
Then consult the distributor for necessary help.
HOW TO ADJUST INCLINE
Just move 2 rear legs forward or backward for 2 different gradients.
11
Summary of Contents for CHEER 465
Page 1: ...MOTORIZED TREADMILL CHEER 465...
Page 18: ...Exploded Drawing 16...
Page 20: ...2016 02 01...