6
To finish assembling the arms assembly, the rest of the assembly has to slide onto the
spindle rod (FSR-100). First, the set-screws in the hex set-screw bushings (FSR-101-A) have to
be loosened so that they can slide onto the spindle rod. Next the swivel mount assembly
weldment should be slid onto the bottom of the spindle rod. Then the two hex set-screw
bushings, the wire tray arm stop washer (FSR-104), the spring (FSR-103), and the small washer
(FSR-108) should be slid onto the spindle rod between the two star hubs as shown in figure 2.
Figure 2
The parts of the arms assembly should be stacked on the spindle rod in the order shown above.
