10
Figure 6
The arms assembly comes screwed to the floor bracket. This must be dismounted.
Mounting the Arms Assembly to the Floor Bracket
The arms assembly has to be attached to the floor bracket in order to use it as a floor reel.
First screw a 5/8” jam nut (HDFR-111) onto the swivel mount assembly weldment (FSR-110).
Then slide the swivel mount assembly weldment through the hole in the floor bracket as shown
in figure 7. Finally, screw the second 5/8” jam nut underneath the floor bracket to pinch it in
place.
Figure 7
The jam nuts need to be screwed onto the swivel mount assembly, pinching the floor bracket between the
two nuts.
