QuickTap IFB
Telephone Handset IFB Tap
FAQs
What kind of earpiece should I
use with the QuickTap IFB?
Any standard earpiece should work
fine as long as it has an impedance
greater than 600 ohms.
I want to send the QuickTap
IFB's XLR output to an
auxiliary input of my mixer
but I'm not getting any audio.
What's wrong?
The QuickTap IFB is a passive device
that outputs a mic level signal. You'll
need to send the output to a mic input
on your mixer.
How do I adjust the level
of the XLR output on my
QuickTap IFB?
The attenuator on the QuickTap IFB
only adjusts the 1/8" earpiece jack.
The male XLR provides a fixed level
600 ohm output.
I'd like to use a pair of
headphones with my
QuickTap IFB. Is this
possible?
The QuickTap IFB is a passive
device and will not power a pair of
headphones. You'll need to use a
JK Audio RemoteAmp with it. The
RemoteAmp will take the balanced
output from the QuickTap IFB, amplify
it and send it to a 1/4" headphone jack
and a 3.5 mm output jack.
4
