Battery installation
How to remove the battery
Undercarriage installation
Insert the bulge of the undercarriage into the holes locating at the bottom of the motors and fix the
screws by clockwise.
Turn clockwise of the lock knob at the rear of the battery to “l” position; then put your thumb and index
finger on the designated position and pull backward with appropriate force, the battery will be removed.
To avoid slipping, please keep your finger and your drone dry and clean.
!
Attention: The battery should be installed firmly, failure to do so may affect the flight safety
of your drone. The drone may crash due to power-cut during the flight.
Slide the battery into the battery compartment at the rear of the drone by pushing with appropriate
force, the drone will make beep sounds with LED lights flashing. Then, turn counter-clockwise of the
lock knob locating at the rear of the battery to the “ ” position to confirm the battery is installed firmly.
-4-
