Prepare the flight
Before you take off, check and make sure that
1. Connect the remote controller with the drone and then proceed drone initialization detection.
2. Drone compass calibration.
3. Unlock the drone after the gyro detection of the drone is completed.
4. Pull up the throttle stick then the drone takes off, and control the drone flight by left/right stick.
5. Pull down the throttle stick to the bottom position and keep for 3 seconds to lock the drone.
6. Pull out the battery from the drone and then turn off the remote controller.
Pic. 1
Pic. 2
Model
Model
Model
Low voltage warning
●When the battery icon “ ” is shown on the LCD screen, and the drone front lights glow solid on
and the rear lights keep flashing rapidly, it means that the battery is in low voltage.
●When the battery icon “ ” is shown on the LCD screen, and the drone front lights glow solid on
and the rear lights keep flashing slowly, it means that the battery is nearly low voltage.
Signal strength indicator
Signal strength “ ” shows the strength of the received signal. The more, the better.
1. The drone and the remote controller are full charged.
2. The propellers are installed correctly.
3. The motors work normally after unlocking.
Basic flight operation steps
-18-
