How To Use the Wireless AC Flash Trigger
：
1.
Set the Transmitter and Receiver to the same channel.
1 2 3 4
ON
DIP
Transmitter
1 2 3 4
ON
DIP
Receiver
2.
Connect the (4) AC output pin to the socket of digital monolight, then insert the power
cable into the (1) AC input Jack of receiver.
3.
Insert the (5) trigger signal output pin into the control socket of the digital monolight.
4.
If the monolight adopts the miniphone control socket, use the 6.35mm to 3.5mm
receiver adapter plug to convert the (5) Trigger signal output plug to miniphone plug.
6.35mm to 3.5mm
STEP 1
STEP 2
STEP 3
