PAGE 6 of 42
4.2. Tools
4.2.1. Included tools
The 3 mm hex driver
(Fig. 14)
is sufficient for all typical operations and
adjustments of the
MICROBE
.
The 3/8 in wrench
(Fig. 15)
is used to remove and install buttons on the probe
holders.
4.2.2. Optional tools
Some specialized adjustments require tools that are not included with this kit.
Fig. 12
- Pre-Amp Bracket
CES029-
Fig. 13
- MICROBE Case
BTA002
Fig. 14
- 3 mm hex driver
Fig. 15
- 3/8 in wrench
Fig. 16
- 1.5 mm hex
wrench
Fig. 17
- 2 mm
hex wrench
Fig. 18
- 2.5 mm
hex wrench
Fig. 19
- 3 mm
hex wrench
