- 10
-
Figure 2 above: PV module installed with Screw fitting method*
2.3.2 Fixation with clamps
The applicable products only allow using clamps at long side of frames.
The module clamps should not come into contact with the front glass and must not
deform the frame. Be sure to avoid shadowing effects from the module clamps. The
module frame is not to be modified under any circumstances. When choosing this
type of clamp-mounting method, please be sure to use at least four clamps on each
module, two clamps should be attached on each long side of the module. The applied
torque should be big enough to fix it steadily
（
about 8 N-m
）
, for safety, you
‟d better
follow the clamps manufacture
‟s recommendation. Please find detailed mounting
information in the below illustration, the mounting place distance is suggested bigger
than J and less than K
，
as showed below.
Summary of Contents for JKMxxxM-60 Series
Page 1: ...JinkoSolar Photovoltaic Module User Manual UL1703 ...
Page 22: ... 20 Note ...
