Jinhua Unisky Tools TY-JSU3-B, User Manual, Page: 14 / 21

14
1. Take the insulating sheet or Battery Replacement
Please take out the battery insulation film placed in the battery compartment before
use.
Use a coin to turn the battery cover in the direction of unlocking, unscrew and re
move the battery insulation film, then put back the battery and tighten the battery
cover. The same goes for changing the battery
2. Start using
1
）
Rotate the wheel to activate the sensor. When the LED flashes, the sensor is
activated. If the sensor has not been connected, the LED will blink for 90 seconds,
and the device will go into dormant state again.
2
）
Search the sensor with code meter or APP and connect it. After successful
connection, the LED will be displayed as steady after 15 seconds.
3
）
After successful connection, you can start your ride.