2
‐
1 Open the box and check all the parts and quantity according to the spare parts
list.
2
‐
2 Put up the frame.
1
）
As shown in figure 1, put up the two A pipes of the bike trainer to the maximum
position, place them on the working surface, and ensure that the movable pin of B
cylinder slides into slot C.
2
）
As shown in the figure above, align the round hole on the electromagnetic coil
damper with the round hole on the iron stand, put a flat washer on the hexagon bolt,
and then pass the bolt through the round holes on the iron stand and the damper at
the same time to make it fixed in series, finally put on the flat washer, and tighten
the lock nut with the L
‐
type socket spanner.
