3.If there is heavy frost on the evaporator after long usage, take out the
stuff inside the case, disconnect the power, the frost will melt
automatically, clean up the water and connect the power again.
4.Use a soft cloth and dip some water or soap (Non-caustic, neutral
detergent is also available) to clean the unit. Dry the unit after
cleaning to avoid rust.
5.Do not use organic liquid, boiled water, washing powder or acid stuff
to clean the unit. Rinsing the case by water is not allowed, don’t use
hard brush, steel brush to clean the case.
6.If the unit will not be used for a long time, disconnect the power,
clean it by following the above steps, wipe off the water inside the
case with a soft cloth.
9.Caution
1.The unit is not suitable for storage of blood, pharmaceutical products
and biological products
2.Do not place heavy articles on the top of the unit.
3.In case of trouble, please ask professional person for service, do not
dismantle the unit without prior authority to avoid hazard.
10.Normal Phenomena
1.Sometime hear light sound of water flowing in the unit, this is the
sound of refrigerant flowing inside the pipe.
2.the top ,and the two sides of the casing will be warm, even too hot.
3.In a humidity place, there is dew on the casing or the door, it can dry
