3. Safety Cautions
1.This unit uses AC220~240V/50Hz or AC110V-120V/60Hz power,
there should be a 500va stabilizer if the voltage luctuation exceed
AC187
～
242V
or 98V-127V/60Hz respectively.
2.The user should hold the plug when the power is on/off, dragging or
pulling the power cord is prohibited.
3.Do not remove the power cord or plug
4.Must use dependent socket and reliable ground wire. Ground wire
must not connect with the null line of the gas pipe, warm gas pipe,
water pipe and must be single power
5.Never splash water on the unit directly.
6.Keep away from explosive, hazardous goods such as ether, gas,
alcohol, bonding agents, gunpowder etc.
7. Keep away from spray of inflammables such as paints, coating
materials etc.
8.After the unit is switched off, it should not be restarted within 5
minutes.
9.Do not leave the power cord under any heavy objects including the
unit itself.
10.Do not drill holes or install other objects on the casing.
11.This cooler is not suitable for storage pharmaceutical products.
4. Portage and storage
1.Keep the unit vertical when carrying the unit, the angle to the
horizontal line should not be
over 50 °
，
otherwise it will damage the compressor and affect
normal operation of the unit.
2.The unit should be place on a solid and firm ground, take away the
bottom pack to lower
the shock and noise.
