4
②
bearing
③
, interior jacket
④
, offset sleeve and positioning sleeve
⑦
(illustrated as followed)
Fig.1-2
When working, paste the resin with pattern on the printing roller by
double-side tape ( it is equipped with special register table), then install it
on the interior sleeve
④
, fasten the screws, then turn the hand wheel
⑧
pressing the rubber roller, the pressure must be moderate ( because the
printing pressure is too heavy , it maybe damages the precision of the
machine), then turn the printing machine to transfer the oil to the blanket
and observe whether the pattern is clear or not. If is not clear, it is maybe
caused by three aspects: one is the pressure is too heavy, the other is the
Summary of Contents for JS-1042
Page 12: ...11 ...