9
Jinbei App/Bluetooth*
Download the „Jinbei“ app directly from the App Store or the
„Jinbei Studio“ app from the Google Play Store (iOS 9.0 or
higher, Android 5.0 or higher)
Connection with the smartphone
1. Activate Bluetooth®* on your smartphone.
2. Switch on the Jinbei EFD-300/500 and activate Bluetooth* in
the settings menu of the control box.
3. Open the „Jinbei (Studio)” app and the connection to your
smartphone will be established automatically.
Note:
If you wish to connect the LED light to the app on
another smartphone, go to the menu to reset the Bluetooth*
signal.
Note:
•
The connection is established using „Bluetooth* Low Energy“
(BLE). For this, a location release of the app is required. The
connection to the LED light is produced directly in the app.
DMX control
Connect the control box to your DMX controller via the DMX
connections ”IN“ and ”OUT“.
Updating the firmware
The Jinbei EFD-300/500 has a USB-C port which can be used
to update your device.
In our download area at www.jinbei-deutschland.de/en offer
you the latest firmware for your product. Download the file and
install the firmware on your device via USB cable. You will find
detailed instructions in the download file. To avoid malfuncti-
ons, please make sure that your device always runs with the
latest firmware.
• In the settings menu, you can select whether you want to
control the LED light by 2.4 GHz radio signal, Bluetooth* or
DMX control.
The relevant symbol appears in the top left-hand corner of
the display.
•
2.4 GHz radio signal:
This LED continuous light is compatible
with LED remote control EF-RC. With the 2.4 GHz radio signal
set, you can set the channel and group using the radio signal
button.
• By briefly pressing the radio signal/Bluetooth* button the
channel display starts to flash and you can set one of 32
channels (00 – 31) using the setting knob.
• Pressing the radio signal/Bluetooth* key again causes the
group display to flash and you can set one of 16 groups
(A – J / L / O / P / Q / S / U) with the rotary knob.
• Confirm the settings by pressing the setting knob.
• When using radio remote controls, note that, for correct ope-
ration, the radio channel and the group must be set identi-
cally on each permanent LED light and on the remote control.
It is also possible that not all functions can be set with the
remote control.
• Note that the radio frequency (2.4 GHz) used by these de-
vices is shared with other users/devices. This means that
interference cannot be ruled out. If necessary, change the
radio channel to avoid interference.
Download on the
External control
