Jimmy H9 Flex, Instruction Manual, Page: 13 / 100

11
Trouble Shooting
Please check the following issues before sending to designated repair agent.
When there is electric components defect,which needs professional after service person for instruction or repairing,
LED screen will display the defect warning with error code of F1 to F8. Please contact after service of local agent
and provide error code.
Discarded machine contains batteries. They should be recycled safely. Do not discard them
randomly.
If there is damage on power cord, to avoid danger, it should be replaced or repaired by
manufacturer
、
repairing agency or professional person.
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved.
The appliance is only to be used with the power supply unit provided.
Trouble Possible Causes Solutions
Motor does not
work
Battery has no power Charge the vacuum cleaner
Metal tube,floorhead, battery
pack and vaccum cleaner is not
assembled correctly
Check the accessories are
assembled correctly to the vacuum
cleaner
Suction drops
Dust cup full Clean dust cup
Filter blocked Clean or replace filter
Floorhead air path blocked Clean floorhead air path
Short working time
after charging
Machine not fully charged
Follow instruction manual to fully
charge the battery
Battery old aging
New batteries can be bought from
local distributor
Dust content
indicator is always
red
Dust sensor covered by dust
Clean the dust on the dust sensor
which is located in the suction inlet
of the handheld vacuum cleaner