Jimmy AP36, User Manual

Page: 9 / 56

7
Trouble shooting
Please check the following trouble points before go to the maintenance department.
Problems Possible Reasons Solution
Power Failure
No power on socket Check power
Power cord plug is not firmly inserted Insert the power cord plug
No air blows out
Something are blocking the air inlet or
air outlet
Move machine or remove foreign
objects or check plastic bag of filter
whether is removed
Motor not working Contact with local distributor
Bad smell from the air
outlet
Temporarily generates a lot of
odor(Many people smoke etc)
The odor gradually disappears after
turn on machine for a while
L o n g t i m e n o r e p l a c i n g t h e
filter(Different use environment cause
different filter life, filter may need to be
dried or replaced within a few months
or even weeks)
Place the filter in a sunny or well-
ventilated place for about 2-3 hours
to evaporate water.( Do not put it in
the sun to expose in case of deform
the filter to affect the performance of
the machine)
Replace the filter
All indicator lights
are off, machine
automatically enter
sleep mode when there
is a light in the room
The surrounding light is weak, which
may affect the light sensor and cause
the machine to enter sleep mode
Moving the machine to a brighter
place
Machine cannot enter
sleep mode when the
light is turned off
Obvious light source outdoors
shooting into the room through doors
and windows prevents the machine
entering sleep mode
Prevent light sources entering, such
as closing doors and windows,
drawing curtains, etc.
Air quality display
always shows red does
not change colour
Infrared dust sensor air outlet and lens
are dirty
Clean the upper and lower air outlets
and lens with cotton swabs
Poor cleaning effect
In an unventilated place, or there are
obstacles near the machine
Place the machine in a ventilated
position and remove obstacles
Multifunctional composite filter has not
been replaced for a long time
Replace multifunctional composite
filter
Note: If fault remains after adopting the following solutions, contact after sale service or local distributor
immediately.