(2) Delete SOS Numbers
Send SMS command:
SOS, D,1,2,3#
(D means delete SOS number)
e.g.
SOS, D,1# means delete the first number
SOS, D,3# means delete the third number
If you do not know the sequence number, you can also delete the number by SMS command like this:
SOS, D,
number#
e.g.
SOS, D, 135278****0#
means delete this SOS number directly.
It will reply “OK” if the number is deleted successfully.
(3) Add SOS numbers via platform
You can set SOS number via the platform after activating the terminal.
6.4
Set Center Number
Send SMS command from the SOS number to set the Center Number.
(1) Add Center Number:
Send SMS command:
CENTER, A, number#
e.g.
CENTER,A, 135278****0#
(2) Delete Center Number
Send SMS command :CENTER,D, number#
e.g.
CENTER,D, 135278****0#
NOTE: Center Number can be set ONLY by SOS numbers.
6.5
Check current parameters
Send SMS command:
PARAM#
The terminal will reply messages including: IMEI number, GPRS upload interval, time interval that GPS is
activated when ACC is off, SOS numbers, center number, sensor alarm interval, defense time and time zone.
6.6
Set GPS data upload interval
(1) Upload by interval
The default upload interval is 20 seconds, which means every 20 seconds the terminal will upload its location data
to the platform. The interval can be set by sending SMS command:
TIMER,T1,T2#
(5
≤
T
≤
18000 seconds)
e.g.
TIMER,20,30#
It means when ACC is on, GPS data upload interval is 20 seconds; when ACC is off, GPS data upload interval is
30 seconds.
(2) Upload by distance
Send SMS command:
DISTANCE,D#
(100
≤
D
≤
10000 meters)
e.g.
DISTANCE,300#
Summary of Contents for JM01
Page 1: ...User Manual ...
