(1) Use multi-meter to find out the negative pole of the battery.
(2) Use multi-meter to find out the ACC wire. Method: Use the red pen to connect with the ACC wire while the
black pen connects with the ground wire. In this condition, when the ignition lock is off, the voltage is 0; when the
ignition lock is turned on, the multi-meter will show the voltage.
(3) The red line (positive pole) of the terminal cable should be connected to the positive pole of the battery.
(4) Follow the picture above to connect the wires.
(5) When the terminal is connected to external power, insert the SIM and the red indicator (power indicator)
should be normally on. When the ignition lock is turned off, the red indicator should be flashing slowly.
(6) The yellow wire of the relay control line should be connected to 86 as the picture shows.
5
Power ON/OFF
5.1
Power ON
The terminal will be automatically on when you insert the SIM card. The battery will connect the internal wires
together in the terminal and the external power supply will start providing power to the device and also charging
Summary of Contents for JM01
Page 1: ...User Manual ...
