PK-13-GB(V1)
www.jilong.com
8
9
PK-13-GB(V1)
www.jilong.com
INFLATING THE KAYAK
INFLATING THE KAYAK
Caution: Do not over inflate or use a high-pressure pump. The maximum
pressure for air chamber.
Caution: Do not over inflate, or use a high-pressure pump!
- Unscrew the valve cap A, assemble the Inflation Adapter with inflating mouth B,
air pressure meter and the air pump.
Inflating:
Remove the valve cap A, push down the deflation button C and turn the valve
clockwise direction by 90° until its is locked, release the valve and the air will flow
out. If you want to stop the deflation, push down the deflation button C and turn
it in counter-clockwise direction by 90°. The deflation will stop when the valve is
released.
Deflating:
Install the direction fin on the bottom of Kayak. Please refer to below illustration.
Assembly of the oar
OPERATING INSTRUCTION
After the inflation adapter is assembled completely, you can inflate the kayak by
number sequence. Do not over inflate. After inflating screw the valve cap A in
clockwise direction by hand.
Fill each chamber until it is stiff. Measure the printed ruler to 10cm with the
equipped hard ruler to check the main chamber for proper inflation.
0.15bar(2.18PSI) for chamber 1,2
0.10bar(1.45PSI) for chamber 3
