6
C
7
8
3
2
1
9
5
1
1
2
4.4 Position adjustment
Y-belt position adjustment
●
As your baby grows up, Y-shaped belt can be removed
from the metal splitter plate ( on the back side of this
seat ) and relocated from slot F to slot G ( Figure 10 ).
●
Make sure the y-belt is flat and slightly below the
baby's shoulders (Figure 11).
6
4.3 Baby fixation and notes
Length adjustment:
●
Extend the Y-shaped belt——press the adjusting button( Figure 5), mean while stretching out the belt.
Note: Do not put shoulder pad.
●
Push the red button on buckle to release Y-shaped belt.
●
Put aside the buckle tongues seperately ( Figure 6 ).
●
Put your baby into the baby safety seat, then put Y-shaped belt onto baby’s shoulder gentely ( Figure 7 ).
Note
：
Do not twist or cross Y-shaped belt.
●
To lock Y-shaped belt , place the two buckle tongues together properly, then plug it into the buckle slot.
A“ click”sound can be heard as a sign of locked
（
Figure 8
）
.
Note
：
the proper loaction of the buckle is near your baby’s crotch rather than his/her belly.
●
Pull the adjuster strap through the arrow direction ( Figure 9 ) to fasten the Y-shaped belt. The proper
tightness is a two-finger space between Y-shaped belt and your baby’s chest.
10
11
G
F