6.2 Cover cleaning
Baby safety seat must not be used without cover.
●
The cover can be removed. Clean the cover in warm water ( lower than 30
℃
) with mild detergent, dry
naturally. No drying.
●
Plastic parts can be cleaned with soap water. Do not use strong detergent ( for example, dissolvant ).
●
straps and tethers can be cleaned in soap water.
●
Shoulder pad can be removed and cleaned in soap water.
10
Please read this instruction and relative parts of your vehicle manual. Please follow this instruction
when installing and using this baby car seat. Not following this instruction may lead to a severe injury
or death to your child. Please keep this instruction in safety place in case of future reading.
Note: The picture is for reference only,subject to the actual products please.
1.
This is a “universal” children restraint system (CRS) which is approved to ECE Regulation No.
44, 04 series of amendments , for general use in vehicles and it will fit most, but not all, car seats.
2.
A correct fit is likely if the vehicle manufacturer has declared in the vehicle handbook that the
vehicle is capable of accepting a "Universal" child restraint for this age group.
3.
This child restraint has been classified as "Universal" under more stringent conditions than those
which applied to earlier designs which do not carry this notice.
4.
Only suitable if the approved vehicles are fitted with 3 point safety-belt approved to UN/ECE
Regulation No. 16 or other equivalent standards.
5.
If in doubt, consult either the child restraint manufacturer or the retailer.
Thanks for buying BC100B baby safety seat
！