Wi-Fi connecting
Hx6s
Blue LED flicker
Blue LED flicker
H button
Jog
x2
Release the
button
LED
LED
Way 2:
Prg
Jog
x1
Jog
x1
Down
Up
Jog
x1
Wi-Fi connecting
Wi-Fi
LED
P
05 Troubleshooting
04 Connecting to Wi-Fi network
h.
Wi-Fi
c. Operate the motor to enter Wi-Fi network connection mode
：
①
Download APP
Fault
Cause
Solution
The motor does not run or
start slowly
1. Low voltage
2. Wrong wire connection
3. Overloading
4.Wrong installation
1.Adjust the voltage to rated
data
2.Correct the wire connection
3.Put the suitable weight for
roller shade
4.Reinstall the tubular motor
The motor suddenly stop
The motr has exceeded termal
overheat protection (4 minutes)
Wait for the motor to cool
down for approximately 20
minutes
The motor makes a
strange noise when it runs
1.The crown and drive adapter
are not well adapterd to tube
2.The driving tube is too long,
cused the brackets are too
tightly
1.Change correct size crown
and drive adapter
2.If idler is active, make
driving tube shorter to avoid
the tight status
