1. Slide the
driving wheel
onto the rear axle(right side). And keep the
driving wheel
match with the
Motor Gear inserted.
3. Slide the wheel trim and
Ø10 Washer
onto the
rear axle
.
4. Tighten a
Ø10 Locknut
to the end of the
rear axle
with a spanner.
5. Align the two tabs of the hubcap with the slots of the wheel trim, and press the
hubcap into places.
Repeat the above steps for the other driving wheel.
8
1
2
3
4
5
Hint: An extra spanner has been provided to hold the locknut on the side of the
rear axle while tightening the locknut on the other side.
Rear axle
Wrench
ASSEMBLY - INSTALLING THE REAR WHEELS
Attach the
Rear
Driving Wheel
