JH600 Maintenance Manual
Overview
-3-
8. Before operating, always remove the negative (-)
end of the battery first and take care to prevent
the wrench or the like from touching the frame.
After operating, reconfirm all the connections,
fixings and junctions. If the battery is already
removed, connect the positive (+) end first.
9. In case the fuse is blown, check for the causes
and, after being repaired, replace corresponding
fuse as per the specified capacity.
10. The caps must be securely put on the terminals
after the operation is complete.
11. While disassembling a connector joints with lock,
release the lock before proceeding with
operation.
While disassembling a connector joints, hold the
connector body without pulling the wire harness.
Before connecting the connector, the terminals
shall be free from breaking or bending. Make
sure the terminals are not too long or are falling
off.
Confirm capacity!
