7
REMOVING COLLECTED WATER
There are 3 options to remove water collected by your dehumidifier.
●Option 1: Drain Bucket.
When the drainage bucket is full, the bucket full indicator light will turn on, the operation will
stop automatically and the buzzer will beep 3 times to alert the user, that the water need to
be emptied from the drainage bucket.
Emptying the Drainage bucket
1. Lightly press on the sides of the bucket with both hands and pull the bucket out gently.
2. Drain the collected water.
NOTE
1. Do not remove the float from the water bucket. The water full sensor will no longer be
able to detect the water level correctly without the float and water may leak from the water
bucket.
2. If the drainage bucket is dirty, wash it with cold or lukewarm water. Do not use detergent,
scouring pads, chemically treated dust cloths, gasoline, benzene, thinner, or other
solvents, as these can scratch and damage the bucket and cause water leakage.
3. When replacing the drainage bucket, press the bucket firmly into place with both hands.
