JHCTech WPPC-H1580T User Manual Download Page 3

Page: 3 / 60

User’s Manual

Copyright

The documentation and the software included with this product are copy- righted 2020 by Shenzhen JHC

Technology Development Co., Ltd. All rights are reserved. Shenzhen JHC Technology Development Co.,

Ltd. reserves the right to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any

means without the prior written permission of Shenzhen JHC Technology Development Co., Ltd.

Information provided in this manual is intended to be accurate and reliable. However, Shenzhen JHC

Technology Development Co., Ltd. assumes no responsibility for its use, nor for any infringements of the

rights of third parties, which may result from its use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation.

Intel, Skylake and Kabylake are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

All other product names or trademarks are properties of their respective owners.

For more information on this and other JHC products, please visit our websites at:

http://www.jhctech.com.cn

Summary of Contents for WPPC-H1580T





























































Search results

Summary of Contents for WPPC-H1580T

Reviews:

Related manuals for WPPC-H1580T

Brands by name

Popular brands

JHCTech WPPC-H1580T, User Manual

Search results

Summary of Contents for WPPC-H1580T

Reviews:

Related manuals for WPPC-H1580T

Brands by name

Popular brands