JHCTech KMDA-3610 User Manual Download Page 3

Page: 3 / 70

User’s Manual

Copyright

The documentation and the software included with this product are copy- righted 2019 by Shenzhen JHC

Technology Co., Ltd. All rights are reserved. Shenzhen JHC Technology Co., Ltd. reserves the right to

make improvements in the products described in this manual at any time without notice. No part of this

manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior

written permission of Shenzhen JHC Technology Co., Ltd. Information provided in this manual is intended

to be accurate and reliable. However, Shenzhen JHC Technology Co., Ltd. assumes no responsibility for

its use, nor for any infringements of the rights of third parties, which may result from its use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation.

Intel, Skylake and Kabylake are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

All other product names or trademarks are properties of their respective owners.

For more information on this and other JHC products, please visit our websites at:

http://www.jhctech.com.cn

Summary of Contents for KMDA-3610







































































Search results

Summary of Contents for KMDA-3610

Reviews:

Related manuals for KMDA-3610

Brands by name

Popular brands

JHCTech KMDA-3610, User Manual

Search results

Summary of Contents for KMDA-3610

Reviews:

Related manuals for KMDA-3610

Brands by name

Popular brands